View UPD16715AN_663168.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
MOS INTEGRATED CIRCUIT
PD16715A
384-OUTPUT TFT-LCD SOURCE DRIVER (COMPATIBLE WITH 64-GRAY SCALES)
DESCRIPTION
The PD16715A is a source driver for TFT-LCDs capable of dealing with displays with 64-gray scales. Data input is based on digital input configured as 6 bits by 6 dots (2 pixels), which can realize a full-color display of 260,000 colors by output of 64 values -corrected by an internal D/A converter and 5-by-2 external power modules. Because the output dynamic range is as large as VSS2 + 0.1 V to VDD2 - 0.1 V, level inversion operation of the LCD's common electrode is rendered unnecessary. Also, to be able to deal with dot-line inversion when mounted on a single side, this source driver is equipped with a built-in 6-bit D/A converter circuit whose odd output pins and even output pins respectively output gray scale voltages of differing polarity. Assuring a maximum clock frequency of 55 MHz when driving at 3.0 V, this driver is applicable to XGA/SXGA-standard TFT-LCD panels.
FEATURES
* CMOS level input * 384 outputs * Input of 6 bits (gradation data) by 6 dots * Capable of outputting 64 values by means of 5-by-2 external power modules (10 units) and a D/A converter Logic power supply (VDD1): 3.3 V 0.3 V +2.5 * Driver power supply (VDD2): 11.0 V -2.0 V * High-speed data transfer: fCLK = 55 MHz (internal data transfer speed when operating at 3.0 V) * * Output dynamic range VSS2 + 0.1 V to VDD2 - 0.1 V * Apply for only dot-line inversion * Single bank arrangement is possible (POL) * Display data inversion function (POL2) * Low power control function (LPC) Single-sided mounting (Slim TCP)
*
*
ORDERING INFORMATION
Part Number Package TCP (TAB package)
PD16715AN- xxx
Remark
The TCP's external shape is customized. To order your TCP's external shape, please contact an NEC salesperson.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. S13944EJ2V0DS00 (2nd edition) Date Published December 1999 NS CP(K) Printed in Japan
The mark * shows major revised points.
(c)
1998,1999
PD16715A
1. BLOCK DIAGRAM
STHR R,/L CLK STB C1 C2 64-bit bidirectional shift register STHL VDD1 VSS1 C63 C64
D00 to D05 D10 to D15 D20 to D25 D30 to D35 D40 to D45 D50 to D55 POL2
Data register
POL
Latch
VDD2 Level shifter VSS2
V0 to V9
D/A converter
Voltage follower output LPC
S1
S2
S3
S384
Remark /xxx indicates active low signal.
2. RELATIONSHIP BETWEEN OUTPUT CIRCUIT AND D/A CONVERTER
S1 S2 S383 S384
V4 V5 V9
*****
V0 Multiplexer
5
6-bit D/A converter 5
*****
POL
2
Data Sheet S13944EJ2V0DS00
PD16715A
3. PIN CONFIGURATION (PD16715AN-xxx xxx) xxx
VSS2 VDD2 R,/L POL STB D55 D54 D53 D52 D51 D50 D45 D44 D43 D42 D41 D40 D35 D34 D33 D32 D31 D30 STHL V9 V8 V7 V6 V5 V4 V3 V2 V1 V0 VDD1 CLK VSS1 POL2 STHR D25 D24 D23 D22 D21 D20 D15 D14 D13 D12 D11 D10 D05 D04 D03 D02 D01 D00 LPC TEST VDD2 VSS2
S384 S383 S382 S381
Copper Foil Surface
S4 S3 S2 S1
Remark This figure does not specify the TCP package.
Data Sheet S13944EJ2V0DS00
3
PD16715A
4. PIN FUNCTIONS
(1/2)
Pin Symbol S1 to S384 D00 to D05 D10 to D15 D20 to D25 D30 to D35 D40 to D45 D50 to D55 R,/L Shift direction control input These refer to the start pulse input/output pins when driver ICs are connected in cascade. The shift directions of the shift registers are as follows. R,/L = H: STHR input, S1 S384, STHL output R,/L = L : STHL input, S384 S1, STHR output R,/L = H: Becomes the start pulse input pin. R,/L = L : Becomes the start pulse output pin. R,/L = H: Becomes the start pulse output pin. R,/L = L : Becomes the start pulse input pin. Refers to the shift register's shift clock input. The display data is incorporated into the data register at the rising edge. At the rising edge of the 64th clock after the start pulse input, the start pulse output reaches the high level, thus becoming the start pulse of the next-level driver. The initial-level driver's 64th clock becomes valid as the next-level driver's start pulse is input. If 66 clock pulses are input after input of the start pulse, input of display data is halted automatically. The contents of the shift register are cleared at the STB's rising edge. The contents of the data register are transferred to the latch circuit at the rising edge. And, at the falling edge, the gray scale voltage is supplied to the driver. It is necessary to ensure input of one pulse per horizontal period. POL = L: The S2n-1 output uses V0 to V4 as the reference supply ; The S2n output uses V5 to V9 as the reference supply. POL = H : The S2n-1 output uses V5 to V9 as the reference supply ; The S2n output uses V0 to V4 as the reference supply. S2n-1 indicates the odd output: and S2n indicates the even output. Input of the POL signal is allowed the setup time (tPOL-STB) with respect to STB's rising edge. POL2 LPC Data inversion Driver voltage selection POL2 = H : Display data is inverted. POL2 = L : Display data is not inverted The output buffer constant current source is blocked, reducing current consumption. Low power mode (LPC = `H': DC-level input possible). The condition that low power mode can be used is that the load constant is at least 10 k + 50 pF. V0 to V9 -corrected power supplies Input the -corrected power supplies from outside by using operational amplifier. Make sure to maintain the following relationships. During the gray scale voltage output, be sure to keep the gray scale level power supply at a constant level. VDD2 - 0.1 V > V0 > V1 > V2 > V3 > V4 > V5 > V6 > V7 > V8 > V9 > VSS2 + 0.1 V Test pin. Please input H or Open. 3.3 V 0.3 V 11.0 V
+ 2.5 - 2.0
Pin Name Driver output Display data input
Description The D/A converted 64-gray scale analog voltage is output. The display data is input with a width of 36 bits, viz., the gray scale data (6 bits) by 6 dots (2 pixels). DX0 : LSB, DX5: MSB
STHR
Right shift start pulse input/output Left shift start pulse input/output Shift clock input
STHL
CLK
STB
Latch input
POL
Polarity input
TEST VDD1 VDD2 VSS1 VSS2
Test pin Logic power supply Driver power supply Logic ground Driver ground
V
Grounding Grounding
4
Data Sheet S13944EJ2V0DS00
PD16715A
Cautions 1. The power start sequence must be VDD1, logic input, and VDD2 & V0 to V9 in that order. Reverse this sequence to shut down. (Simultaneous power application to VDD2 and V0 to V9 is possible.) 2. To stabilize the supply voltage, please be sure to insert a 0.47 F bypass capacitor between VDD1-VSS1 and VDD2-VSS2. Furthermore, for increased precision of the D/A converter, insertion of a bypass capacitor of about 0.01 F is also advised between the -corrected power supply terminals (V0, V1, V2, ***, V9) and VSS2.
5. RELATIONSHIP BETWEEN INPUT DATA AND OUTPUT VOLTAGE VALUE
The PD16715A incorporates a 6-bit D/A converter whose odd output pins and even output pins output respectively gray scale voltages of differing polarity with respect to the LCD's counter electrode (common electrode) voltage. The D/A converter consists of ladder resistors and switches. The ladder resistors r0 to r62 are so designed that the ratios between the LCD panel's - corrected voltages and V0' to V63' and V0" to V63" are roughly equal; and their respective resistance values are as shown on next page. Among the 5-by-2 -corrected voltages, input gray scale voltages of the same polarity with respect to the common voltage, for the respective five -corrected voltages of V0 to V4 and V5 to V9 Figure 5-1 shows the relationship between the driving voltages such as liquid-crystal driving voltages VDD2 and VSS2, common electrode potential VCOM, and - corrected voltages V0 to V9 and the input data. Be sure to maintain the voltage relationships of VDD2 - 0.1 V > V0 > V1 > V2 > V3 > V4 > V5 > V6 > V7 > V8 > V9 > VSS2 + 0.1 V. Figures 5-2 and 5-3 show the relationship between the input data and the output voltage. Therefore, please do not use it for - corrected power supply level inversion in double-sided mounting. Figure 5-1. Relationship Between Input Data and - corrected Power Supply -
VDD2 0.1 V V0
8 V1
24
V2 24 V3 7 V4 VCOM V5 7 V6 24 V7 Split interval
24
V8 8
V9 0.1 V VSS2 00 08 20 38 3F Input Data (HEX)
Data Sheet S13944EJ2V0DS00
5
PD16715A
Figure 5-2. Relationship between Input Data and Output Voltage (1/2) - VDD2 - 0.1 V > V0 > V1 > V2 > V3 > V4
Data 00H 01H 02H 03H 04H 05H 06H 07H 08H 09H 0AH 0BH 0CH 0DH 0EH 0FH 10H 11H 12H 13H 14H 15H 16H 17H 18H 19H 1AH 1BH 1CH 1DH 1EH 1FH 20H 21H 22H 23H 24H 25H 26H 27H 28H 29H 2AH 2BH 2CH 2DH 2EH 2FH 30H 31H 32H 33H 34H 35H 36H 37H 38H 39H 3AH 3BH 3CH 3DH 3EH 3FH DX5 DX4 DX3 DX2 DX1 DX0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 V0' V1' V2' V3' V4' V5' V6' V7' V8' V9' V10' V11' V12' V13' V14' V15' V16' V17' V18' V19' V20' V21' V22' V23' V24' V25' V26' V27' V28' V29' V30' V31' V32' V33' V34' V35' V36' V37' V38' V39' V40' V41' V42' V43' V44' V45' V46' V47' V48' V49' V50' V51' V52' V53' V54' V55' V56' V57' V58' V59' V60' V61' V62' V63' Output Voltage V0 V1+(V0-V1)x 4300 V1+(V0-V1)x 3550 V1+(V0-V1)x 2850 V1+(V0-V1)x 2200 V1+(V0-V1)x 1600 V1+(V0-V1)x 1050 V1+(V0-V1)x 500 V1 V1+(V0-V1)x 5200 V1+(V0-V1)x 4800 V1+(V0-V1)x 4400 V1+(V0-V1)x 4050 V1+(V0-V1)x 3700 V1+(V0-V1)x 3350 V1+(V0-V1)x 3050 V1+(V0-V1)x 2750 V2+(V1-V2)x 2450 V2+(V1-V2)x 2200 V2+(V1-V2)x 1950 V2+(V1-V2)x 1700 V2+(V1-V2)x 1500 V2+(V1-V2)x 1300 V2+(V1-V2)x 1100 V2+(V1-V2)x 950 V2+(V1-V2)x 800 V2+(V1-V2)x 650 V2+(V1-V2)x 500 V2+(V1-V2)x 400 V2+(V1-V2)x 300 V2+(V1-V2)x 200 V2+(V1-V2)x 100 V2 V3+(V2-V3)x 2450 V3+(V2-V3)x 2350 V3+(V2-V3)x 2250 V3+(V2-V3)x 2150 V3+(V2-V3)x 2050 V3+(V2-V3)x 1950 V3+(V2-V3)x 1850 V3+(V2-V3)x 1750 V3+(V2-V3)x 1650 V3+(V2-V3)x 1550 V3+(V2-V3)x 1450 V3+(V2-V3)x 1350 V3+(V2-V3)x 1250 V3+(V2-V3)x 1150 V3+(V2-V3)x 1050 V3+(V2-V3)x 950 V4+(V3-V4)x 850 V4+(V3-V4)x 750 V4+(V3-V4)x 650 V4+(V3-V4)x 550 V4+(V3-V4)x 450 V4+(V3-V4)x 300 V4+(V3-V4)x 150 V3 V4+(V3-V4)x 2300 V4+(V3-V4)x 2100 V4+(V3-V4)x 1850 V4+(V3-V4)x 1600 V4+(V3-V4)x 1300 V4+(V3-V4)x 800 V4 r n() r0 800 r1 750 r2 700 r3 650 r4 600 r5 550 r6 550 r7 500 r8 500 r9 400 r10 400 r11 350 r12 350 r13 350 r14 300 r15 300 r16 300 r17 250 r18 250 r19 250 r20 200 r21 200 r22 200 r23 150 r24 150 r25 150 r26 150 r27 100 r28 100 r29 100 r30 100 r31 100 r32 100 r33 100 r34 100 r35 100 r36 100 r37 100 r38 100 r39 100 r40 100 r41 100 r42 100 r43 100 r44 100 r45 100 r46 100 r47 100 r48 100 r49 100 r50 100 r51 100 r52 100 r53 150 r54 150 r55 150 r56 200 r57 200 r58 250 r59 250 r60 300 r61 500 r62 800 rtotal 15850
V0 r0 r1
V0' V1' V2' r2 V3' r3 V4' r4 V5' r5 V6' r6 V7' r7
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
5100 5100 5100 5100 5100 5100 5100 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2500 2500 2500 2500 2500 2500
V1 r8 r9
V8' V9'
r30 V31' r31 V2 r32 V33' r33 V32'
r54 V55' r55 V3 r56 V57' r57 V58' r58 V59' r59 V60' r60 V61' r61 V62' r62 V4 V63' V56'
V5 r62 r61
V63'' V62'' V61'' r60
6
Data Sheet S13944EJ2V0DS00
PD16715A
Figure 5-3. Relationship between Input Data and Output Voltage (2/2) - V5 > V6 > V7 > V8 > V9 > VSS2 + 0.1 V
Data 00H 01H 02H 03H 04H 05H 06H 07H 08H 09H 0AH 0BH 0CH 0DH 0EH 0FH 10H 11H 12H 13H 14H 15H 16H 17H 18H 19H 1AH 1BH 1CH 1DH 1EH 1FH 20H 21H 22H 23H 24H 25H 26H 27H 28H 29H 2AH 2BH 2CH 2DH 2EH 2FH 30H 31H 32H 33H 34H 35H 36H 37H 38H 39H 3AH 3BH 3CH 3DH 3EH 3FH DX5 DX4 DX3 DX2 DX1 DX0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 V0'' V1'' V2'' V3'' V4'' V5'' V6'' V7'' V8'' V9'' V10'' V11'' V12'' V13'' V14'' V15'' V16'' V17'' V18'' V19'' V20'' V21'' V22'' V23'' V24'' V25'' V26'' V27'' V28'' V29'' V30'' V31'' V32'' V33'' V34'' V35'' V36'' V37'' V38'' V39'' V40'' V41'' V42'' V43'' V44'' V45'' V46'' V47'' V48'' V49'' V50'' V51'' V52'' V53'' V54'' V55'' V56'' V57'' V58'' V59'' V60'' V61'' V62'' V63'' Output Voltage V9 V9+(V8-V9)x 800 V9+(V8-V9)x 1550 V9+(V8-V9)x 2250 V9+(V8-V9)x 2900 V9+(V8-V9)x 3500 V9+(V8-V9)x 4050 V9+(V8-V9)x 4600 V8 V9+(V8-V9)x 500 V9+(V8-V9)x 900 V9+(V8-V9)x 1300 V9+(V8-V9)x 1650 V9+(V8-V9)x 2000 V9+(V8-V9)x 2350 V9+(V8-V9)x 2650 V9+(V8-V9)x 2950 V8+(V7-V8)x 3250 V8+(V7-V8)x 3500 V8+(V7-V8)x 3750 V8+(V7-V8)x 4000 V8+(V7-V8)x 4200 V8+(V7-V8)x 4400 V8+(V7-V8)x 4600 V8+(V7-V8)x 4750 V8+(V7-V8)x 4900 V8+(V7-V8)x 5050 V8+(V7-V8)x 5200 V8+(V7-V8)x 5300 V8+(V7-V8)x 5400 V8+(V7-V8)x 5500 V8+(V7-V8)x 5600 V7 V7+(V6-V7)x 100 V7+(V6-V7)x 200 V7+(V6-V7)x 300 V7+(V6-V7)x 400 V7+(V6-V7)x 500 V7+(V6-V7)x 600 V7+(V6-V7)x 700 V7+(V6-V7)x 800 V7+(V6-V7)x 900 V7+(V6-V7)x 1000 V7+(V6-V7)x 1100 V7+(V6-V7)x 1200 V7+(V6-V7)x 1300 V7+(V6-V7)x 1400 V7+(V6-V7)x 1500 V7+(V6-V7)x 1600 V6+(V5-V6)x 1700 V6+(V5-V6)x 1800 V6+(V5-V6)x 1900 V6+(V5-V6)x 2000 V6+(V5-V6)x 2100 V6+(V5-V6)x 2250 V6+(V5-V6)x 2400 V6 V6+(V5-V6)x 200 V6+(V5-V6)x 400 V6+(V5-V6)x 650 V6+(V5-V6)x 900 V6+(V5-V6)x 1200 V6+(V5-V6)x 1700 V5 rn() r0 800 r1 750 r2 700 r3 650 r4 600 r5 550 r6 550 r7 500 r8 500 r9 400 r10 400 r11 350 r12 350 r13 350 r14 300 r15 300 r16 300 r17 250 r18 250 r19 250 r20 200 r21 200 r22 200 r23 150 r24 150 r25 150 r26 150 r27 100 r28 100 r29 100 r30 100 r31 100 r32 100 r33 100 r34 100 r35 100 r36 100 r37 100 r38 100 r39 100 r40 100 r41 100 r42 100 r43 100 r44 100 r45 100 r46 100 r47 100 r48 100 r49 100 r50 100 r51 100 r52 100 r53 150 r54 150 r55 150 r56 200 r57 200 r58 250 r59 250 r60 300 r61 500 r62 800 rtotal 15850
r60 V61' r61 V62' r62 V4 V63'
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
5100 5100 5100 5100 5100 5100 5100 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 5700 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2550 2500 2500 2500 2500 2500 2500
V5 r62 r61
V63'' V62'' V61'' r60 V60'' r59 V59'' r58 V58'' r57 V57'' r56
V6 r55 r54
V56'' V55''
r33 V33'' r32 V7 r31 V31'' r30 V32''
r9 V9'' r8 V8 r7 V7'' r6 V6'' r5 V5'' r4 V4'' r3 V3'' r2 V2'' r1 V1'' r0 V9 V0'' V8''
Data Sheet S13944EJ2V0DS00
7
PD16715A
6. RELATIONSHIP BETWEEN OUTPUT DATA AND D/A CONVERTER
Data format : 6 bits x 2 RGBs (6 dots) Input width : 36 bits (2-pixel data) R,/L = H (Right shift)
Output Data S1 D00 to D05 S2 D10 to D15 S3 D20 to D25 S4 D30 to D35 xxx xxx S383 D40 to D45 S384 D50 to D55
R,/L = L (Left shift)
Output Data S1 D00 to D05 S2 D10 to D15 S3 D20 to D25 S4 D30 to D35 xxx xxx S383 D40 to D45 S384 D50 to D55
POL L H
S2n-1
Note
S2n
Note
V0 to V4 V5 to V9
V5 to V9 V0 to V4
Note S2n-1 (Odd output), S2n (Even output), n = 1,2,,192
7. RELATIONSHIP BETWEEN STB, POL, AND OUTPUT WAVEFORM
The output voltage is written to the LCD panel synchronized with the STB falling edge.
STB
POL
S2n-1
Selected voltage of V0 to V4
Selected Voltage of V5 to V9
Selected voltage of V0 to V4
S2n
Selected Voltage of V5 to V9 Hi-Z Hi-Z
Selected voltage of V0 to V4 Hi-Z
Selected Voltage of V5 to V9
8
Data Sheet S13944EJ2V0DS00
PD16715A
8. RELATIONSHIP BETWEEN OUTPUT DATA AND D/A CONVERTER
The PD16715A is a dot inversion and inverts dots by alternately using a charging output buffer and a discharging output buffer. Therefore, the output voltage of the first line may not be correctly written because the last line's output polarity of frame n (n + 1) and the first line's output polarity are the same (refer to Figure 8-1). Consequently, polarity inversion and write operation must be performed between frames (vertical blanking period) in order to invert (clear) the polarity of the wiring level of the liquid crystal panel by using the last line output of the previous frame (refer to Figure 8-2). Figure 8-1. Incase of the output voltage may not be correctly written
STB
Last line of frame n
POL
Discharging output buffer
S2N
Hi-Z
If the write voltage of the first line of the last (n + 1) frame is greater than the write voltage of the last line of frame n, the targeted voltage cannot be correctly written with the
,,, ,,, ,,, ,,, ,,, ,,,
Vertical blanking period First line of frame (n + 1) Second line of frame (n + 1) Charging output buffer
VCOM
Hi-Z
Hi-Z
Figure 8-2. Polarity inversion and write operation
STB
Last line of frame n
POL
S2N
Hi-Z
Because data of negative polarity is to be written on the first line of frame (n + 1),
,,, ,,, ,,, ,,, ,,, ,,, ,,,
Hi-Z
Vertical blanking period First line of frame (n + 1) Second line of frame (n + 1)
VCOM
Hi-Z
Hi-Z
Data Sheet S13944EJ2V0DS00
9
PD16715A
5. ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (TA = 25 C, VSS1 = VSS2 = 0 V)
Parameter Logic Part Supply Voltage Driver Part Supply Voltage Logic Part Input Voltage Driver Part Input Voltage Logic Part Output Voltage Driver Part Output Voltage Operating Ambient Temperature Storage Temperature Symbol VDD1 VDD2 VI1 VI2 VO1 VO2 TA Tstg Ratings -0.3 to + 6.5 -0.5 to + 15.0 -0.3 to VDD1 + 0.3 -0.3 to VDD2 + 0.3 -0.3 to VDD1 + 0.3 -0.3 to VDD2 + 0.3 -10 to +75 -55 to +125 Unit V V V V V V C C
Caution If the absolute maximum rating of even one of the above parameters is exceeded even momentarily, the quality of the product may be degraded. Absolute maximum ratings, therefore, specify the values exceeding which the product may be physically damaged. Be sure to use the product within the range of the absolute maximum ratings.
Recommended Operating Range (TA = -10 to +75 C, VSS1 = VSS2 = 0 V)
Parameter Logic Supply Voltage Driver Supply Voltage High-Level Input Voltage Low-Level Input Voltage -Corrected Voltage Driver Part Output Voltage Clock Frequency Symbol VDD1 VDD2 VIH VIL V0 to V9 VO fCLK MIN. 3.0 9.0 0.7 VDD1 0 VSS2 + 0.1 VSS2 + 0.1 TYP. 3.3 11.0 MAX. 3.6 13.5 VDD1 0.3 VDD1 VDD2 - 0.1 VDD2 - 0.1 55 Unit V V V V V V MHz
10
Data Sheet S13944EJ2V0DS00
PD16715A
Electrical Characteristics (TA = -10 to +75 C, VDD1 = 3.3 V 0.3 V, VDD2 = 11.0 V
Parameter Input Leak Current High-Level Output Voltage Low-Level Output Voltage Symbol IIL VOH VOL I STHR (STHL), IOH = 0 mA STHR (STHL), IOL = 0 mA VDD2 = 13 V, V0 to V4 = V5 to V9 = 6.0 V Driver Output Current IVOH IVOL Output Voltage Deviation Average Output Voltage Variation Output Voltage Range Logic Part Dynamic Current Consumption Driver Part Dynamic Current Consumption VO VAV VX = 8.0 V, VOUT = 6.0 V VX = 1.0 V, VOUT = 3.0 V Input data Input data 10 0.25 20 V0 pin, V5 pin V4 pin, V9 pin -0.8 0.31 -0.31 -0.25 VDD1 - 0.1 Condition
+2.5 -2.0 V,
VSS1 = VSS2 = 0 V)
TYP. MAX. 1.0 VDD1 0.1 0.8 Unit
MIN.
A
V V mA mA mA mA mV mV
*
-Corrected Supply Current
VO IDD1
Input data VDD1 = 3.6 V, TA = 25C
VDD2 +0.1 1.5
VDD2 - 0.1 8
V mA
IDD2
VDD1 = 3.0 V, VDD2 = 13.5 V, No loads, TA = 25C
3.5
8
mA
Cautions 1. The output voltage deviation refers to the voltage difference between adjoining output pins when the display data is the same (within the chip). 2. The average output voltage variation refers to the average output voltage difference between chips. The average output voltage refers to the average voltage between chips when the display data is the same. 3. The STB cycle is defined to be 20 s at fCLK = 33 MHz. 4. The TYP. values refer to an all black or all white input pattern. The MAX. value refers to the measured values in the dot checkerboard input pattern. 5. Refers to the current consumption per driver when cascades are connected under the assumption of XGA single-sided mounting (8 units). Switching Characteristics (TA = -10 to +75 C, VDD1 = 3.3 V 0.3 V, VDD2 = 11.0 V
Parameter Start Pulse Delay Time Driver Output Delay Time Symbol tPLH1 tPLH2 tPLH3 tPHL2 tPHL3 Input Capacitance CI1 CI2 STHR (STHL) excluded, TA = 25C STHR (STHL),TA = 25C CL = 25 pF CL = 50 pF, RL = 50 k Condition
+2.5 -2.0 V,
VSS1 = VSS2 = 0 V)
TYP. 9.1 5.2 9.9 5.3 10.4 5.8 5.7 MAX. 14 11 17 11 17 15 15 Unit ns
MIN.
s s s s
pF pF
Data Sheet S13944EJ2V0DS00
11
PD16715A
Timing Requirement (TA = -10 to +75 C, VDD1 = 3.3 V 0.3 V, VSS1 = VSS2 = 0 V, tr = tf = 8.0 ns)
Parameter Clock Pulse Width Clock Pulse High Period Clock Pulse Low Period Data Setup Time Data Hold Time Start Pulse Setup Time Start Pulse Hold Time POL2 Setup Time POL2 Hold Time STB Pulse Width Data Invalid Period Last Data Timing CLK-STB Time STB-CLK Time Time Between STB and Start Pulse POL-STB Time STB-POL Time Symbol PWCLK PWCLK(H) PWCLK(L) tSETUP1 tHOLD1 tSETUP2 tHOLD2 tSETUP3 tHOLD3 PWSTB tINV tLDT tCLK-STB tSTB-CLK tSTB-STH CLK STB STB CLK STB STHR(STHL) POL or STB STB POL or Condition MIN. 18 5 5 0 8 4 5 0 8 500 1 2 5 5 50 TYP. MAX. Unit ns ns ns ns ns ns ns ns ns ns CLK CLK ns ns ns
tPOL-STB tSTB-POL
-7 9
ns ns
12
Data Sheet S13944EJ2V0DS00
*
9. SWITCHING CHARACTERISTICS WAVEFORM (R,/L = H)
(Unless otherwise specified, the input level is defined to be VIH =0.5 VDD1.)
PWCLK(L) PWCLK PWCLK(H)
1 2
90%
tr
10%
tf VDD1 VSS1 VDD1 VSS1
CLK t SETUP2 STHR
(1st Dr.)
1
2
3
64
65
66
1025
1026
t HOLD2
t CLK-STB
t STB-CLK
t SETUP1 Dn0 - Dn5
INVALID D1 - D6
t HOLD1
D373 D378 D379 D384 D385 D390 D3067 D3072 INVALID
t STB-STH VDD1
D1 - D6 D7 - D12
D7 - D12
VSS1 VDD1
t SETUP3 POL2
Data Sheet S13944EJ2V0DS00
INVALID
t HOLD3
INVALID
VSS1 t PLH1 STHL
(1st Dr.)
VDD1 VSS1 t LDT t INV PWSTB VDD1
STB t POL-STB POL t PLH3 t PLH2 t STB-POL
VSS1
VDD1 VSS1
Hi-Z
V out
Target Voltage 0.1VDD2 6-bit accuracy t PHL2 t PHL3
PD16715A
13
PD16715A
7. RECOMMENDED SOLDERING CONDITIONS
The following conditions must be met for soldering conditions of the PD16715A. For more details, refer to the Semiconductor Device Mounting Technology Manual (C10535E). Please consult with our sales offices in case other soldering process is used, or in case the soldering is done under different conditions. Type of Surface Mount Device
PD16715AN-xxx : TCP (TAB package) xxx
Mounting Condition Thermocompression Mounting Method Soldering Condition Heating tool 300 to 350C, heating for 2 to 3 seconds: pressure 100g (per solder) ACF (Adhesive Conductive Film) Temporary bonding 70 to 100C: pressure 3 to 8 kg/cm : time 3 to 5 seconds. 2 Real bonding 165 to 180C: pressure 25 to 45 kg/cm : time 30 to 40 seconds. (When using the anisotropy conductive film SUMIZAC1003 of Sumitomo Bakelite, Ltd.)
2
Caution To find out the detailed conditions for packaging the ACF part, please contact the ACF manufacturing company. Be sure to avoid using two or more packaging methods at a time.
14
Data Sheet S13944EJ2V0DS00
PD16715A
NOTES FOR CMOS DEVICES
1 PRECAUTION AGAINST ESD FOR SEMICONDUCTORS Note: Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred. Environmental control must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using insulators that easily build static electricity. Semiconductor devices must be stored and transported in an anti-static container, static shielding bag or conductive material. All test and measurement tools including work bench and floor should be grounded. The operator should be grounded using wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need to be taken for PW boards with semiconductor devices on it. 2 HANDLING OF UNUSED INPUT PINS FOR CMOS Note: No connection for CMOS device inputs can be cause of malfunction. If no connection is provided to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused pin should be connected to VDD or GND with a resistor, if it is considered to have a possibility of being an output pin. All handling related to the unused pins must be judged device by device and related specifications governing the devices. 3 STATUS BEFORE INITIALIZATION OF MOS DEVICES Note: Power-on does not necessarily define initial status of MOS device. Production process of MOS does not define the initial operation status of the device. Immediately after the power source is turned ON, the devices with reset function have not yet been initialized. Hence, power-on does not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the reset signal is received. Reset operation must be executed immediately after power-on for devices having reset function.
Data Sheet S13944EJ2V0DS00
15
PD16715A
Reference Documents NEC Semiconductor Device Reliability / Quality Control System (C10983E) Quality Grades to NEC's Semiconductor Devices (C11531E)
* The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. * NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. * Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. * While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. * NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance.
M7 98. 8

▲Up To Search▲

Price & Availability of UPD16715AN

	To Download UPD16715AN Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .